Aohua System Panel 2+3 Pin Male Female IP68 Waterproof Electric Cable Connector
An waterproof electric cable connector is an circuit connecting components with favorable waterproof grade to prevent water penetration circuit, which is an electromechanical device used to create an electrical connection between different electrical circuits or between parts of an electrical circuit, then joining them into a larger or smaller circuit.
Male
Part number: AH-M20-0623FMF01112
This is male panel 2+3 pin connector, which is solder version terminal. They are composed of 2 large terminals and 3 small terminals, the size are φ2.0mm and φ1.5mm. For this solder terminall, there are crown spring and slit type.
This connector is male plug, will be mounted on the panel hole, and it is front panel mount that mean the hex nut will be in front of the panel.
Parameter:
Voltage: 60V
Current: 6+2A
Wire Gauge: 1.0mm²+0.3mm²
PIN: φ2.0mm + φ1.5mm
Female
Part number: AH-M20-0623MFN01112
This connector is the mating female socket to male panel plug. The M20 electric cable connector of basic inline connector is male with screw nut (inside threads) and female mating (outside threads). So that this female elctric cable connector is a adapter that is with screw nut (inside threads), which is only mating with the male panel plug(outer threads).
The connector is over molding with cable, which is the wire soldered on the terminal and then over mold. For this electric cable connector, the cable OD range is 5.5mm to 10mm. The parameter is same as male plug.
Female
Part number: AH-M20-0623MFZ01112
This electric cable connector is field assembly connector, which is also a adapter that is only mating with the male connector with outer threards. For this assembly connector, it composed by waterproof nut, cable gland, enclosure, coupling nut, female core, and O-ring. And this is solder version terminal only, you can install it your own cable that we dont provide the cable wire. When install, diseperate waterproof nut, cable gland, enclosure only first, then you can put the cable going through these components orderly, the next is that solder the wire on terminal. At last re-assembly all these components. Choosing this electric cable connector, you need to confirm your cable jacket outer diameter before order to ensure the cable can go through and get good waterproof grade.
For this 2+3 pin electric cable connector, it would be used to the pump controller system usually. The larger pin is enough for the power and the smaller pin is better for data transport or signal transport. Choosing a right connector is the according to the safe power supply. So that please confirm your power current rating, wire gauge, and cable jacket OD and so on before make a order.
The below datas of M20 2+3pin electric cable connector is just for reference, please choosing the correct connector according your actural application.
Voltage Rating |
60V |
Current Rating |
6+2A |
Wire Gauge |
1.0mm²+0.3mm² |
Cable Jacket OD |
5.5mm-10mm |
Opertating Temperature |
-40ºC~+105ºC |
Waterproof Level |
IP67 / IP68 |
Cable Gland |
13*9*6.5/7.5/8.5/9.5/10mm |
As a professional manufacturer of prodcuing cable connector, we can customize many types of cable with connectors, you just need to tell us with your idea and solution, our engineer will give a professional designing and scientific&economic products.
In AOHUA company, we have many departments with different functions, such as engineers Dept. with technology supporting, mold Dept with mold designing*making, cable making Dept. with electrical wire making for reducing the delivery time, Injection Dept. with connector molding, and so on. With more than 5000m²factory, we believe that choosing AOHUA is wise.