Product Description
ODM OEM Customized Multiple socket-outlets Waterproof 2pin M15 Distributor Connector
M15 connector: nylon material, waterproof F splitter type
Applications: outdoor led module or cable splitter.
Wire size:
Main cable 2*1.0mm², OD=6.8±0.2mm
Branch cable 2*0.75mm², OD=6.3±0.2mm
This is customized power waterproof distributor that is included 2 to 6 sockets.
The connector is standard M15 thread that is compatible to most of connectors on market.
The input cable is molded with cable, and the branch male connector can be assembly type or molding type.
How to order waterproof distributor?
Before order, please specify the wire and power details including:
1. socket numbers;
2. working ampere and voltage, such as: main cable 10A/110V, branch cable 5A/110V;
3. wire gauge and cable length, such as: 14AWG/16AWG, length 300mm/500mm.
4. connection type, such as Parallel or series.
Contact Numbers |
2 |
Voltage Rating |
300V |
Current Rating |
10A |
Wire Gague |
≤1.5mm² |
Cable OD |
6.8-8.3mm |
Mechanical Life |
3000 mating cycles |
Operating Rating |
-40ºC-+105ºC |
Waterproof Level |
IP67 |
Related Products
Customized different pins distributor connector.
Model: M20
Current Rated: 15A
Rated Voltage: 110V
Wire Gauge: ≤1.5mm²
Cable OD: 5-10mm
Customize cable solution for driver power
Includes customized distributor and connector for power.
The LED power module male-female waterproof 2-pin M15 distributor is a specialized connector used in LED lighting systems. It enables the distribution of power between LED modules or segments while providing a waterproof and secure connection. Here's a brief guide on how to make this type of connector:
-
Select Components: Gather the necessary components, including a male-female 2-pin M15 connector, suitable cable, and waterproofing materials like silicone seals or shrink tubing.
-
Prepare the Cable: Cut the cable to the desired length, ensuring it is compatible with the connector. Strip the insulation from the cable ends to expose the conductors.
-
Connector Assembly: Insert the prepared cable into the appropriate sections of both the male and female connectors. Ensure proper alignment of the cable with the connector pins.
-
Secure the Connection: Fasten the connector components together firmly to create a secure connection. Use any locking mechanisms provided by the connector or additional means like screws or clamps for added stability.
-
Waterproofing: Apply the waterproofing materials, such as silicone seals or shrink tubing, over the junction where the cable enters the connector. Ensure a tight and secure seal to prevent water ingress.
-
Testing and Inspection: Test the connector assembly for continuity and proper electrical connection. Inspect the waterproofing to ensure it effectively protects the connection from moisture.
-
Installation: Install the assembled connector in the LED lighting system by plugging the male connector into the corresponding female connector on the LED module or segment.
By following these steps, you can create an LED power module male-female waterproof 2-pin M15 distributor. Remember to exercise caution, read and follow manufacturer guidelines, and prioritize safety when working with electrical connections. This homemade connector will provide a reliable and waterproof solution for distributing power in your LED lighting system. |