Power Cable Distributor Waterproof Outdoor Cable Wire Connector
This is only 2 positions connector, which is suitable for 2 wires cable installation. And it is screw lugs for wire installation.
This connector is without cable, it need to prepare the cable in advance. And this is assembly type connector, which is assembled with some components. The components includes waterproof nut, cable gland, enclosure, connector core, O-ring.
Material:
1. Plastic: nylon
2. Metal: gilded brass
3. O-ring/cable gland: silicone rubber
The connector carries up to 10A/300V wire, the input wire is largest 1.5mm². And the cable jacket OD is required no larger than 10mm otherwise the cable can not go through the cable gland.
How to order a right connector for your device?
1. confirm your cable power, such as 10A/300V input;
2. specify your wire gauge and cable jacket OD, such as main cable 2*1.5mm², OD8mm, branch 2*1.0mm², OD7mm;
3. choose the right cable gland for your cable. Because the cable will go through the cable gland and the cable gland will good for waterproof effect, the cable gland is larer but close to cable jacket OD will be better.
Contacts |
2 position |
Voltage |
300V |
Current |
10A |
Wire Gauge |
1.5mm² |
Cable OD |
5.0-10mm |
Operating Temperature |
-40ºC~+105ºC |
Waterproof Grade |
IP67/IP68 |
H16 splitter: nylon PA66 material, favorable for hard environment.
Screw fixing type is easy for installation.
1 to 2, 1 to 3, 1 to 4 splitters for choices.